Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why some time the voice during the call of the GSM mobile ca

Status
Not open for further replies.
anwer_sbh

anwer_sbh

Full Member level 1
Joined
Jul 11, 2006
Messages
99
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
iraq
Activity points
1,892
Why some time the voice during the call of the GSM mobile can not be understood?
i.e its dicontinouse?
 

Re: Why some time the voice during the call of the GSM mobil

anwer_sbh said:
Why some time the voice during the call of the GSM mobile can not be understood?
i.e its dicontinouse?
Click to expand...
Bad reception (weak coverage) on one or either sides.
 

Re: Why some time the voice during the call of the GSM mobil

Modulation formats that are spread spectrum are more immune to multipath fading than narrowband formats.

Keep this in mind when you chose which carrier to buy services from..
 

Re: Why some time the voice during the call of the GSM mobil

Signal power loss due to multipath may be one reason.
 

Re: Why some time the voice during the call of the GSM mobil

Due to multipath fading, the signal is weakend or cancelled at some points . If the mobile receiver is at that location, signal may be disrupted or lost.
The solution is to come in open area or to alk for some diatance.
In closed area, the multipath fading is more prominent.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top