Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help simulate a microstrip array on a cone shape CST.

Status
Not open for further replies.
B

bbvv

Member level 1
Joined
Aug 24, 2006
Messages
36
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,498
Hy

I have to simulate a microstrip array on a cone shape .
I have already did it on a cylinder but i have problem constructing the array on a cone .

even if i enlarge the mesh density the eror remain.

there is another problem fixing the discrete port if i have several layers.

thanks in advance

35_1157781790.JPG
 

Re: need help simulate a microstrip array on a cone shape

In time domain the port have to be parallel to the mesh or xyz axis switch to freq. domain
or try to rotate the antenna in the angel of the cone to get it in direction of xyz axis then build the area of the port in cube with xyz axis.
for two element try to build parallel axis patch extention and then connect the port.

pl
 

    B

    bbvv

    Points: 2
    Helpful Answer Positive Rating
Re: need help simulate a microstrip array on a cone shape

I have tried to switch to freq domain but I have got the same error.

(see attached).

The idea to rotate the all structure is not viable because I can’t achieve the accuracy needed for the port location to be parallel. ( how many digits after. ).
75_1157835876.JPG


the same file attached 13.doc
 

Re: need help simulate a microstrip array on a cone shape

go to macro -> file -> archive you will get ziped project and then p.m. to me I'll try to solve your problem

pl
 

    B

    bbvv

    Points: 2
    Helpful Answer Positive Rating
Re: need help simulate a microstrip array on a cone shape

can someone please explain why the simulation work on a cylinder shape

and doesnt working with a cone shape .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top