+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Full Member level 5
    Points: 2,926, Level: 12

    Join Date
    Feb 2006
    Location
    tokyo
    Posts
    297
    Helped
    6 / 6
    Points
    2,926
    Level
    12

    Re: Encounter log file

    pls find enc log file

    •   AltAdvertisement

        
       

  2. #2
    Member level 1
    Points: 1,763, Level: 9

    Join Date
    Nov 2004
    Posts
    37
    Helped
    1 / 1
    Points
    1,763
    Level
    9

    Re: Encounter log file

    For the auto place & route, you can follow the steps in the below link:

    http://www.ece.ncsu.edu/muse/fe/counter/


    There are some errors of your config files(.conf). You can set them in the GUI of Encounter, so you no need to import your config file.

    Only 4 files you need to import to the Encounter:
    1. .v (your synthesized netlist)
    2. .lef (technology library)
    3. .tlf (timing library)
    4. .io (footprint) import if you have this file



    **ERROR: Die Area is not defined
    **ERROR: Standard Cell Region is not defined
    **ERROR: Incorrect height (0.000000)
    **ERROR:

    Before you can do auto P&R, you need specify the core or die area (the area allow the metals to route).

    This parameters can be set in Encounter GUI:
    Floorplan -> Specific Floorplan

    1. Set Core/Die Size (height and width)
    2. Core to IO/Die Boundary > 0


    Hope this can help you

    :D

    Added after 5 minutes:

    This is a good tutorial for Encounter



    •   AltAdvertisement

        
       

  3. #3
    Full Member level 4
    Points: 2,763, Level: 12

    Join Date
    May 2002
    Posts
    208
    Helped
    12 / 12
    Points
    2,763
    Level
    12

    Re: Encounter log file

    Oh, no.
    It's too simple ones. If you have some good manuals than this one?



    •   AltAdvertisement

        
       

  4. #4
    Member level 1
    Points: 1,763, Level: 9

    Join Date
    Nov 2004
    Posts
    37
    Helped
    1 / 1
    Points
    1,763
    Level
    9

    Re: Encounter log file

    Quote Originally Posted by horzonbluz
    Oh, no.
    It's too simple ones. If you have some good manuals than this one?

    The below link is good enough for using Encounter
    http://vlsicad.ucsd.edu/courses/ece2.../Lab2/Lab2.php



  5. #5
    Full Member level 1
    Points: 1,995, Level: 10

    Join Date
    Apr 2005
    Posts
    101
    Helped
    2 / 2
    Points
    1,995
    Level
    10

    Re: Encounter log file

    Your Tcl file is not correctly configured.



--[[ ]]--