Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pic16f877 programmer with JDM or TE-20

Status
Not open for further replies.
T

Telfo2002

Member level 1
Joined
Jan 1, 2002
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
226
te-20 programmer

Hi,
I would like to program a pic16f877 with a standard programmer for pic16f877 (JDM or TE-20) by using some 18 to 28 pinout adapter and using ICPROG software. Is it possible? where could I get information?

Thanks in advance. :)
 

te20 programmer

Hi, you can programm this device with JDM. You only need connect the right pins to microcontroller. For example if for programm PIC16F84 you need connect pin RB7 to VCC then you must connect RB7 of PIC16F877 to VCC. You only need respect the pinout of the programmer. Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top