taless
Newbie level 3
there is a circuit for measurement of bullet speed.I build up circuit in the proteus. but ı receive an error message.error message is:
SIMULATION LOG
==============
Design: C:\PROTEUS\PROTEUS - PROGRAMLARI\amına koyayım.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 17/02/05
Modified: 27/04/06
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [7B4228CE]...
Animation started sucessfully...
PROSPICE Release 6.2 SP0 (C) Labcenter Electronics 1993-2002.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Net VDD taken as alias for VCC
Net VSS taken as alias for GND
Reading SPICE models...
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.01.00 simulating PIC1684 device.
[U1] Loaded 64 bytes of persistent EEPROM data.
[U1] Loading HEX file '..\..\Documents and Settings\ARİSTOTALESS\Desktop\bitti\BBSPD14.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [4000] for this device
Real Time Simulation failed to start
Real Time Simulation FAILED.
the circuit is that adress:
**broken link removed**
please help me what is the problem???and speed unit is m/s in here but ı want to measure
speed unit km/ha.what can ı do???
SIMULATION LOG
==============
Design: C:\PROTEUS\PROTEUS - PROGRAMLARI\amına koyayım.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 17/02/05
Modified: 27/04/06
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [7B4228CE]...
Animation started sucessfully...
PROSPICE Release 6.2 SP0 (C) Labcenter Electronics 1993-2002.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Net VDD taken as alias for VCC
Net VSS taken as alias for GND
Reading SPICE models...
Building circuit...
Instantiating SPICE models...
[U1] PIC16 model release 6.01.00 simulating PIC1684 device.
[U1] Loaded 64 bytes of persistent EEPROM data.
[U1] Loading HEX file '..\..\Documents and Settings\ARİSTOTALESS\Desktop\bitti\BBSPD14.HEX'.
FATAL: [U1] Program or EEPROM data has invalid address [4000] for this device
Real Time Simulation failed to start
Real Time Simulation FAILED.
the circuit is that adress:
**broken link removed**
please help me what is the problem???and speed unit is m/s in here but ı want to measure
speed unit km/ha.what can ı do???