Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

LPC2000 Flash utility problem

Status
Not open for further replies.

alzomor

Advanced Member level 2
Joined
Jun 9, 2005
Messages
674
Helped
39
Reputation
78
Reaction score
8
Trophy points
1,298
Location
Germany
Activity points
6,406
lpc2000 flash utility

Hi
I am trying to download my program to the flash of MBC2130 board of
Keil using LPC2000 Flash utitlity

Each time I get this error

"cannot communicate with test board!"

Is there any required setup for the serial port cabel?
Is there any requested baud rate?

Salam
Hossam Alzomor
www.i-g.org
 

lpc2000 cannot communicate with test board

As I know, PLC2000 detects baud rate automatically. Did yo utry with Philips flash utility?

------------------------------
http://www.scienceprog.com
 

cannot communicate with test board

Hi Hossam,
Yes you have to tell it which port and what rate, etc. Are you using the loader that came on the LPC? I think it is at 9600. You also have to enter your crystal frequency into the flash loader.
Hope this is of some help.
Regards,
Robert
 

download philips lpc2000 flash utility

Hi

Thanks for your help the problem was the serial cable.

The Flash utilitu don't need to be telled the baud rate as the bootloader detects it .
if the LPC crytal is 12000 then 9600 is a good rate
the the LPC crytal is 14xxx wich is common multiple of bude rates then you could program at any supported rate

Salam
Hossam Alzomor
www.i-g.org
 

flash loader utility fehler

Hi

Check the condition of P0.14 it need to be on ground level when using the flash utility

The flash util is using the DTR signal to ground P0.14


All the best

Bobi
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top