Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need a PS 120v 60Hz 4W input and 9V DC 100mA output

Status
Not open for further replies.

SensorDave

Newbie level 1
Joined
Feb 7, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hey all! First time posting. I need this specific application for my testing equipment at work. Any good sites for misc. adapters and power supplies?

Many thanks.
Dave
 

You need to build the circuit?

If so

Does it need to be 9V Regulated output or is unregulated ok?

Is the PSU to be current limited or anything else? (or just need to output at least 100mA)

Any other specs?
- Linear PSU or SMPS
- Line Regulation
- Load Regulation
__________________________________

or else

If your just after an off the shelf unit u should be able to find one quite easily. Just write a sheet with the specs u need and make sure the one you buy matches it.

I'm sure there are plenty of electronics shops that could help you out.

oddbudman
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top