Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

design double switch forward

Status
Not open for further replies.
R

rajabi_u

Newbie level 5
Joined
Jan 17, 2006
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,352
double two transistor forward

hi all
can you help me?
i want design double switch forward that input voltage was 230(+10%;-15%)v:
output voltag was 12±1% v;output current was 20A ;
this switch should be controlled by IC SG3842;
if you knew which book is good for this desine ;that is very good for me.
thanks a lot
rajabi
 

sg3842+application note

Start with a google search on "two transistor forward converter design"
and you will find quite a bit.
https://www.google.com/search?hl=en&lr=&q=two+transistor+forward+converter+design&btnG=Search

Take a look at this application note for example
www.fairchildsemi.com/an/AN/AN-7004.pdf

Study the section on the two-transistor forward converter and see what
devices are being used and then you might want to browse more application
notes and I am quite certain you will find enough information to put
together a design.

Best regards,
\[v_c\]
 
Last edited by a moderator:

double switch forward converter

Hello v_c;
Thank you very much from your answer,
Can you give more becase for design transformer and control by IC;i have problem.
Thanks a lot of.
Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top