Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

RF inductor model for ADS simulation

Status
Not open for further replies.
C

crystal

Advanced Member level 4
Joined
Jun 12, 2003
Messages
117
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,298
Activity points
1,008
I have the RF inductor model (just an example) as shown here;

subckt L_a ( aa bb f )
l1 ( aa c ) inductor l=1.5e-09
r1 ( c bb ) resistor r=4.60
c1 ( aa bb ) capacitor c=3.0e-15
c2 ( d f ) capacitor c=6.0e-14
c3 ( e f ) capacitor c=5.90e-14
r2 ( d f ) resistor r=232.00
r3 ( e f ) resistor r=231.00
c4 ( aa d ) capacitor c=4.20e-14
c5 ( bb e ) capacitor c=5.30e-14
l2 ( bb g ) inductor l=3.50e-10
r4 ( g c ) resistor r=3.2
ends L_a

I need to apply it in to my RF design (i.e LNA) - but how do i get the value of inductor of this subckt?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top