Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SMD SOT23-6 Component Marking Code BR79

Status
Not open for further replies.

dexter_04

Newbie level 5
Joined
May 26, 2020
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
82
Hi everybody,

I'm looking for a component marked BR79.

I've made a lot of research on google with the following tags :

for the package, I've tried with : TSOP6, SOT457, SM6, SMT6, Mini6, SOT23-6, SC-74, SC-59-6

and for marking : BR79, BR7, BR

I've also made the schematic, and I think this component is like a kind of transistor.

Pin 1 is connected to VCC (5V)
Pins 2 & 5 are connected to GND
Pin 3 is connected to the µc (I think is the command)
Pin 4 is also connected to the µc (maybe is a status ?)
Pin 6 is connected to a resistor.

I think when this component is driven, the resistor is put in the circuit (like the circuit is a switch).

If you have any information, I'll be very happy.

Thank you in advance,

Fabrice
 

Hi,

upload a photo of the PCB, where we can see all the connections.

You said you have a schematic, then upload it. Hand drawn is O.K.

Tell us what the PCB is for.


Klaus
 

Thank you for your answer.

The PCB is a milkmeter (from delaval).

schematic.png

IMG_6094.jpg

IMG_6095.jpg

The two components that I'm looking for are U10/U11.

Fabrice
 

Hi,

What about digital pot / EPOT / EEPOT?

Klaus
 

Hi,

Hi,

What about digital pot / EPOT / EEPOT?

Klaus

yes, it looks like a digital potentiometer as R56 is not populated (see second picture).
Are pin 3 & 4 of both ICs are connected to a microcontroller? They seem to be the programming lines.
What's the device name "CI_MM27"?

greets
 

Thanks for all your answers, I'll see about digital potentiometer.
Yes, pins 3&4 are connected the µc.
CI_MM27 is the name that I put because I didn't know these components (that why I'm looking for them). CI is for Integrated Circuit and MM27, the name of the PCB.

- - - Updated - - -

the pinout of MCP4023 (https://www.microchip.com/wwwproducts/en/MCP4023) can correspond to that (even if the marking is different).

Fabrice
 

Dear all,

With your help, I finally found my component, it's a MCP4013T-103E/CH.

Fabrice
 

Attachments

  • Sans titre.png
    Sans titre.png
    40.3 KB · Views: 538

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top