senmos
Newbie level 4
Hi, I've installed the Cadence software and a new hitkit in local in Xubuntu 20.04, but when I try to run a simulation with Pmos the following errors appear in the log file:
These are the messages in ahdlcmi.out:
I simulate a nmos alone and the simulation runs succesfull. I checked that the gnumake(executable) is in the correct path and it has the correct user permissions. How can I fix these issues?
Code dot - [expand] 1 2 3 Error found by spectre during AHDL read in. ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB//92a8e845bfcfac352c9dbd2a38404cdd.esdpsh_va.ahdlcmi/Linux-64//..//ahdlcmi.out for details. Contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and any other information that can help identify the problem. ERROR (SFE-91): Cannot run the simulation because an AHDL compilation error occurred. Check the VACOMP error message above and correct the syntax error in the Verilog-A file. Next, rerun the simulation.
These are the messages in ahdlcmi.out:
Code dot - [expand] 1 2 3 4 /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/gnumake -j12 -f GNUmakefile /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/ahdlcmicompile: 237: /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/gnumake: not found /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/ahdlcmicompile: 238: /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/gnumake: not found /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/ahdlcmicompile: 242: /eda/cadence/2019-20/RHELx86/SPECTRE_19.10.063/tools.lnx86/spectre/ahdlcmi/bin/gnumake: not found
I simulate a nmos alone and the simulation runs succesfull. I checked that the gnumake(executable) is in the correct path and it has the correct user permissions. How can I fix these issues?
Last edited by a moderator: