Motor Driver for Corona Robot

Dear All,
Have a nice day

We are planing to make a RC robot to use in the hospital to treat corona patients
We are going to use H-Bridge to drive the Motors
Please advice the ideal Two MOSFET ( P Channel and N channel ) for following motors
We are planing put 15kg to this robot including robot weight

Model Number: DM-37RS545
Torque: 0.5-20kgf.cm
Permanent Magnet Brush
Continuous Current(A): 0.1A-1.5A



Efficiency:IE 2
Working Current: 0.1A-1.5A
Gearbox Size:37mm round

Following are the available MOSFET in our Local Market
IRF9540
IRF540

K3566
20N60C
RFP50N06
IRF530N

Please advice
Thanks in advanced



[h=1][/h]

Operating Voltage ?
Will it not be convenient to use HBridge Driver IC?

srizbf said:

Operating Voltage ?
Will it not be convenient to use HBridge Driver IC?

Click to expand...

Thanks for reply

Operation voltage is 12v - Car Battery 35A
What is the H Bridge IC that you are recommended

Thanks in advanced

Hi,

This has nothing to do with corona...

You just need to know your specifications and use the selection tools provided by motor driver IC manufacturers and/or distributors.
Either one of us need to do this, or you.
Since we don't know your country, nor the expected price, nor quantity ....nor many other parameters ....it's by far the best/fastest if you start with doing the pre selection on your own.

For sure you are welcome here for further discussions..

Klaus

DRV8829 or other ti hbridge ic to suit the requirement.

KlausST said:

Hi,

This has nothing to do with corona...

You just need to know your specifications and use the selection tools provided by motor driver IC manufacturers and/or distributors.
Either one of us need to do this, or you.
Since we don't know your country, nor the expected price, nor quantity ....nor many other parameters ....it's by far the best/fastest if you start with doing the pre selection on your own.

For sure you are welcome here for further discussions..

Klaus

Click to expand...

Our country has lot of thing to do with this for corona , do not issue the words if you do not have reply

- - - Updated - - -

srizbf said:

DRV8829 or other ti hbridge ic to suit the requirement.

Click to expand...

Yes this may be ideal but our country do not have this . anyway thank for the reply

Hi,

What I wanted to say:
It does not matter if your robot is for corona or not.... --> you should focus on giving useful informations.

in post#4 I wrote:

we don't know your country

Click to expand...

in post#6 you wrote:

Our country...

Click to expand...

but our country do not have this

Click to expand...

As long as you don´t say what "your country" is, there is just a 1/194 chance that we "guess" your country.
In other words 193 out of 194 of our recommendations may be wrong or useless. Not motivating.
We want to help you - but we do not want to solve riddles.

Again: Focus on the things that really matter to bring progress to your good project.

Klaus

- - - Updated - - -

Hi,

in an PM you just asked me why it is important to know your country.

It´s not imortant for me or other members. It´s important for you to get recommendations for drivers that are available in your country.

Klaus

This thread is going to out of the original question
Thanks for your advice . it is very helpful to get red of the my question
my problem has been solved . Thanks for every one

Maybe he discovered that there are already robots running around hospitals over here.