Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need help for ADS equation reprentation...

Status
Not open for further replies.

coolpixs4

Junior Member level 1
Joined
Jun 4, 2010
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Korea
Activity points
1,432
I want to convert the output plot from dBm to mV

But I don't know how to express exponential equation in ADS as Eqn
I'd checked it out from ADS help, but only find the exp() ...

P[dBm] = 10*lg (Po[mW]/1mW]), & consider Lload=50-Ohm

For example: how can we express a^b in ADS Equation ?

Please, help me

Thanks !

This table shows the relationship between Power in [dBm] or [Watts] and Voltage in RMS, peak, peak-to-peak for sinusoidal signals in 50-Ohm systems. **broken link removed**

dbm_img2_d.jpg
 

Hi,

My hint:

dBm refers to 1mW.

Now you want to refer it to the voltage on a 50 Ohms resistor.

This leads to the question: How much voltage on a 50 Ohms resistor do you need to cause 1mW?

Klaus
 

But I don't know how to express exponential equation in ADS as Eqn
I'd checked it out from ADS help, but only find the exp() ...

In ADS help, search for function dbmtov()

For example: how can we express a^b in ADS Equation ?

That is function pow()

You can find a list of functions here:
Help > Simulation > Equations and Expressions > Measurement Expressions
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top