+ Post New Thread
Results 1 to 8 of 8

23rd March 2020, 23:17 #1
 Join Date
 Apr 2018
 Posts
 50
 Helped
 0 / 0
 Points
 683
 Level
 5
Delay time calculation
Hi guys,
I'm just curious and not able to found the answer in the internet, how to calculate the delay using clock cycles.
I have read that the equation is :
Clock cycles =(time delay) *(clock frequency/4).
how did it come to that equation (divide by 4). Thanks

Advertisement

24th March 2020, 01:35 #2
 Join Date
 Jan 2019
 Posts
 575
 Helped
 150 / 150
 Points
 3,156
 Level
 13
Re: Delay time calculation
which processor, FPGA, or other digital IC are you using?
the answer is likely in the data sheet, buried in how the device handles the clock
1 members found this post helpful.

Advertisement

25th March 2020, 16:55 #3
 Join Date
 Apr 2018
 Posts
 50
 Helped
 0 / 0
 Points
 683
 Level
 5
Re: Delay time calculation
I'm using Altera DE10Lite FPGA Development board. I can't find the specs where I'm supposed to know the relationship between clock frequency, cycles and delay. It have 2 50MHz clocks that I'm using.
Here are the product files:
m10_handbook.pdf
m10_datasheet.pdf
DE10Lite_User_Manual.pdf

Advertisement

25th March 2020, 17:33 #4
 Join Date
 Jan 2019
 Posts
 575
 Helped
 150 / 150
 Points
 3,156
 Level
 13
Re: Delay time calculation
i looked in all three docs you posted and did not find what you're asking about.
where did you find
Clock cycles =(time delay) *(clock frequency/4).
see "Fine Resolution Phase Shift" page 166 of handbook
see "PLL outputs" page 155
see "Figure 61: PLL Output Clock Frequency" page 212

25th March 2020, 17:43 #5
 Join Date
 Sep 2013
 Location
 USA
 Posts
 7,493
 Helped
 1758 / 1758
 Points
 32,411
 Level
 43
Re: Delay time calculation
I don't get what your issue is exactly (which is why I ignored your first post).
A clock has a frequency, in your case it is 50 MHz. That clock therefore has a clock period of 20 ns between each rising edge, i.e. 1/(50 MHz) = 20e9. Therefore 1 clock cycle is 20 ns of delay.
If you want to have 500 ns of delay then you have 500 ns/20 ns = 25 clock cycles of the 50 MHz clock will create that much delay.
I have no idea where that equation you showed "Clock cycles =(time delay) *(clock frequency/4)." came from but it requires the clock to be 1/4 of the 50 MHz, i.e. 12.5 MHz.

Advertisement

26th March 2020, 01:29 #6
 Join Date
 Mar 2008
 Location
 USA
 Posts
 6,610
 Helped
 1951 / 1951
 Points
 41,050
 Level
 49
Re: Delay time calculation
Perhaps there is a builtin clock prescaler (like, to make
a 4phase field from a 50MHz main clock)?

26th March 2020, 02:14 #7
Awards:
 Join Date
 Apr 2014
 Posts
 16,671
 Helped
 3779 / 3779
 Points
 82,155
 Level
 69
Re: Delay time calculation
Hi,
If you want to have 500 ns of delay then you have 500 ns/20 ns = 25 clock cycles of the 50 MHz clock will create that much delay.
I have no idea where that equation you showed "Clock cycles =(time delay) *(clock frequency/4)." came from but it requires the clock to be 1/4 of the 50 MHz, i.e. 12.5 MHz.
Clock cycles =(time delay) *(clock frequency/4).
If you replace with the values of your post:
Clock cycles = 25
Time delay = 500ns
Clock frequency = 12.5MHz
Then the formula is not correct
But if you replace with: clock frequency = 200MHz
Then the formula is correct.
KlausPlease don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.

26th March 2020, 15:35 #8
+ Post New Thread
Please login