Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need Solution for voltage divider bias with two source

Status
Not open for further replies.

satiz

Member level 5
Joined
Jun 9, 2013
Messages
87
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Activity points
1,999
Hi there,

Can anyone help me to find Vout for the attached circuit?
How to solve this?
WhatsApp Image 2020-03-23 at 6.52.56 PM.jpeg
 

Hi,

hint:
* interchange [50 Ohms] with [750V]
* then combine [50 Ohms] with [5 milliOhms]

Klaus
 
  • Like
Reactions: satiz

    satiz

    Points: 2
    Helpful Answer Positive Rating
The resistor value is 3Mega ohm
 

use superposition

the voltage at Vout is the sum of voltages at Vout due to the two sources

short source 1 and find Vout from source 2 = Vout from 2
short source 2 and find vout from source 1 = Vout from 1

Vout total = Vout from 2 + Vout from 1
 
  • Like
Reactions: satiz

    satiz

    Points: 2
    Helpful Answer Positive Rating
Hi,
if my guess is correct, Vout is approximatly 2.5V to 5V.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top