# Need Solution for voltage divider bias with two source

1. ## Need Solution for voltage divider bias with two source  Reply With Quote

•

2. ## Re: Need Solution for voltage divider bias with two source

Hi,

hint:
* interchange [50 Ohms] with [750V]
* then combine [50 Ohms] with [5 milliOhms]

Klaus

1 members found this post helpful.  Reply With Quote

3. ## Re: Need Solution for voltage divider bias with two source

Is it 3 mohm or 3 Mohm?  Reply With Quote

4. ## Re: Need Solution for voltage divider bias with two source

The resistor value is 3Mega ohm  Reply With Quote

5. ## Re: Need Solution for voltage divider bias with two source

use superposition

the voltage at Vout is the sum of voltages at Vout due to the two sources

short source 1 and find Vout from source 2 = Vout from 2
short source 2 and find vout from source 1 = Vout from 1

Vout total = Vout from 2 + Vout from 1

1 members found this post helpful.  Reply With Quote

6. ## Re: Need Solution for voltage divider bias with two source

Hi,
if my guess is correct, Vout is approximatly 2.5V to 5V.  Reply With Quote

--[[ ]]--