Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Leaded solder vs LeadFree solder

Status
Not open for further replies.

engr_joni_ee

Advanced Member level 3
Joined
Nov 3, 2018
Messages
726
Helped
2
Reputation
4
Reaction score
4
Trophy points
18
Activity points
6,042
Hi,

I normally use Sn63 and/or Sn62 for soldering with iron temperature around 320 C. Both solders have lead i.e., Pb. I am wondering if I can use leadfree solder with the same soldering station which goes up to 360 C ? Which leadfree solders are more common ?
 

360 C is 680 F
I use a lead free solder at 535 F ( 280 C)

any solder from a reliable manufacturer should be fine
i tend toward Kester, but there is no real reason behind it

i recently used a special solder form Chip Quick to remove a surface mount part
so i might get regular solder from them next time i need to buy
 

Many electronics use solder as the “glue” to attach components to circuit boards. Whether lead-free or lead solder, the function is the same. Lead-free and lead solder do perform the same function. However, different products and applications will use different solders.
-Lead-free solder features higher melting point than lead solder.
-Lead-free solder features worse wettability than lead solder.
 

There are several lead-free solder formulations, but on this side of the World, SAC305 appears to be popular.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top