+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 1
    Points: 14, Level: 1

    Join Date
    Feb 2020
    Posts
    1
    Helped
    0 / 0
    Points
    14
    Level
    1

    Ferrite Cores for EMC Solutions

    I have found I need to insert a ferrite core around a cable in order for the equipment to pass EMC suspectability at 100V/M.
    My question is the core is specfied down to -20C . The spec of the equipment is -40C.
    What detrmental effect if any will this temerature have on the ferrite core?

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 265,442, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    46,381
    Helped
    14116 / 14116
    Points
    265,442
    Level
    100

    Re: Ferrite Cores for EMC Solutions

    You'll review material specification for the respective ferrite type, or refer to general data in text books. Most ferrites have linear (decreasing) permeability over temperature between +50 and -50 degree C, some have almost constant permeability. If you passed the EMC test with some margin, there should be no problem.



--[[ ]]--