Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Getting Started with TI F2837x control card

Status
Not open for further replies.
T

ThanosTheAvenger

Newbie level 4
Joined
Mar 16, 2019
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
41
I recently got TI control card for F2837X cpu ([url]https://www.ti.com/tool/TMDSCNCD28379D)
[/URL]
I am using CCS as an IDE.

I am trying to first understand how to flash a simple LED blink program to the board and debug it. But struggling with it.

I connected the control card to computer with USB cable and tried to flash the program through CCS 9.0. I ended up with following issue...

Error connecting to the target:
(Error -2131 @ 0x0)
Unable to access device register. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK).
(Emulation package 8.4.0.00006)
Click to expand...

How to resolve this issue? Any help will be appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top