+ Post New Thread
Results 1 to 7 of 7

25th January 2020, 09:21 #1
 Join Date
 Nov 2019
 Posts
 27
 Helped
 0 / 0
 Points
 151
 Level
 2
How to choose optimal wire width of spiral coil to attain high q factor?
How to choose optimal wire width of spiral coil to attain high q factor? There are formula to calculate optimal turns n pitch. Is it by trail n error to choose wire width?

Advertisement

25th January 2020, 09:42 #2
Awards:
 Join Date
 Apr 2014
 Posts
 16,462
 Helped
 3736 / 3736
 Points
 81,179
 Level
 69
Re: How to choose optimal wire width of spiral coil to attain high q factor?
Hi,
High Q means low loss.
What are the losses in a coil?
* core loss > choose a core that is suitable for frequency and flux
* ohmic winding loss > choose wires with high (overall) wire cross section, and short length if possible
* loss due to proximity effects > chose useful layer stacking
* loss due to skin effect > choose HF litz instead of one solid wire
* others?
For each of these effects there are numerous documents, tutorials, application notes, calculations ... in the internet.
Thus: No, it's no "trial and error".
But as with every development: it starts with your requirements.
Frequency, waveform, currents, size, cost, Q factor.....
KlausPlease don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.

27th January 2020, 06:56 #3
 Join Date
 Nov 2019
 Posts
 27
 Helped
 0 / 0
 Points
 151
 Level
 2

Advertisement

27th January 2020, 23:32 #4
 Join Date
 Mar 2008
 Location
 USA
 Posts
 6,561
 Helped
 1928 / 1928
 Points
 40,687
 Level
 49
Re: How to choose optimal wire width of spiral coil to attain high q factor?
A problem with spiral inductors is that when you increase
W, looking for Q, you also force the L to grow somewhat
for the same core area. So you won't get the W2/W1
improvement in series R, that you might imagine. You
also increase the stray C (coil bottom area) and selfC
(coil length), bringing down your SRF and your Q.
Some foundries have "inductor tool kits" for specific
processes. Absent this, cut and try and keep track.
1 members found this post helpful.

28th January 2020, 03:14 #5
 Join Date
 Feb 2008
 Posts
 558
 Helped
 190 / 190
 Points
 5,758
 Level
 18
Re: How to choose optimal wire width of spiral coil to attain high q factor?
All major vendors of EM analysis tools  Integrand (EMX), Helic (VeloceRF), Lorentz (PeakView)  provide tools to synthesize an inductor layout to desired characteristics (L, Q, ...).
1 members found this post helpful.

Advertisement

29th January 2020, 11:23 #6
 Join Date
 Nov 2019
 Posts
 27
 Helped
 0 / 0
 Points
 151
 Level
 2
Re: How to choose optimal wire width of spiral coil to attain high q factor?
For various values of wire radius, pitch and internal radius (given that fixed outer diameter) have been simulated using HFSS. It shows that least value of Q is 8 n maximum is 467267. Is this maximum value permissible?
   Updated   
For maximum Q, series resistance should be minimum. For the purpose of minimizing R, i have chosen mimimal wire radius of 0.12mm. But when i increased wire radius to 0.3mm(but decreased turns) i found increased value of Q.

29th January 2020, 11:55 #7
 Join Date
 Apr 2014
 Posts
 2,317
 Helped
 931 / 931
 Points
 14,880
 Level
 29
Re: How to choose optimal wire width of spiral coil to attain high q factor?
This shows that your evaluation of Q is not what others discuss.
+ Post New Thread
Please login