+ Post New Thread
Results 1 to 7 of 7

16th January 2020, 16:54 #1
 Join Date
 Oct 2013
 Posts
 138
 Helped
 4 / 4
 Points
 1,684
 Level
 9
Using ADS2019, How to set and measure tempature values for LNA?
I have designed LNA. I want to measure S21, S11, S22, S12 and NF for different values of Temperature Values such 36^{0}C, 70^{0}C, 15^{0}C. How to set different values of temperature for LNA using ADS2019. Can we set to all components (such as Resistors, Capacitors, Inductors, transistors, MLINs) to temperature separately( Right Click on the components and set temperature values to desired values).
Below I have attached designed LNA with set the temperature values independently on each component. Is this right way to set different temperature values on each component. Please clarify my doubts.

Advertisement

16th January 2020, 17:47 #2
 Join Date
 Apr 2014
 Posts
 2,298
 Helped
 922 / 922
 Points
 14,752
 Level
 29
Re: Using ADS2019, How to set and measure tempature values for LNA?
The most important component in your model  the transistor  is an S2P dataset at one fixed temperature. Your plan makes no sense if you only have that transistor data at that fixed temperature.
1 members found this post helpful.

Advertisement

17th January 2020, 08:15 #3
 Join Date
 Oct 2013
 Posts
 138
 Helped
 4 / 4
 Points
 1,684
 Level
 9
Re: Using ADS2019, How to set and measure tempature values for LNA?
Yes, It is absolutely right. It does not make sense (s2p values will generate for particular temperature).
What should be done?, have we to take nonlinear model of transistor and set it different values of temperature and measure the Sparameters and Noise Figure of LNA.
Guide me, how to set different values of temperature to LNA and measure S parameters and NF of LNA.

Advertisement

17th January 2020, 08:42 #4
 Join Date
 Apr 2014
 Posts
 2,298
 Helped
 922 / 922
 Points
 14,752
 Level
 29
Re: Using ADS2019, How to set and measure tempature values for LNA?
Yes, nonlinear model sounds correct. And use a variable for temperatur, so that you can change it easily for all components.
For the ideal L and C elements in your design temperature will not have an effect.

20th January 2020, 16:50 #5

22nd January 2020, 10:14 #6
 Join Date
 Jun 2018
 Location
 Turkey
 Posts
 141
 Helped
 12 / 12
 Points
 968
 Level
 7
Re: Using ADS2019, How to set and measure tempature values for LNA?

Advertisement

22nd January 2020, 11:55 #7
 Join Date
 Apr 2014
 Posts
 2,298
 Helped
 922 / 922
 Points
 14,752
 Level
 29
Re: Using ADS2019, How to set and measure tempature values for LNA?
I like the Modelithics libraries (license requires)
Some manufacturer also have good passive libraries, for example I often use Murata ADS libraries.
1 members found this post helpful.
+ Post New Thread
Please login