+ Post New Thread
Results 1 to 20 of 39

13th January 2020, 13:07 #1
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9
Finding the input impedance of CCCS
Good day everyone! I need your help on this one. I'd like to derive the equation for the closedloop input impedance of the circuit attached. The final form of the equation is also shown below.
Here's what I have tried
I was stuck. Can you tell what other route I can take to go about this derivation? Thanks!

Advertisement

13th January 2020, 15:21 #2
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 46,193
 Helped
 14049 / 14049
 Points
 264,377
 Level
 100
Re: Finding the input impedance of CCCS
Zin(CL) formula is not correct, instead of R2, an effective resistance of R2 + RLR1 must be put in.

13th January 2020, 15:44 #3
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

13th January 2020, 19:24 #4
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 46,193
 Helped
 14049 / 14049
 Points
 264,377
 Level
 100
Re: Finding the input impedance of CCCS
It's the impedance seen with Av = 0 and Rout = 0.

13th January 2020, 22:45 #5
 Join Date
 Nov 2001
 Location
 US
 Posts
 897
 Helped
 312 / 312
 Points
 10,320
 Level
 24

14th January 2020, 04:52 #6
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

14th January 2020, 07:57 #7
 Join Date
 Nov 2001
 Location
 US
 Posts
 897
 Helped
 312 / 312
 Points
 10,320
 Level
 24
Re: Finding the input impedance of CCCS
R1 is the resistor that complicates a bit the derivation of the input resistance. So, if it were not there, results will be easier. Assuming R1 infinite, I find those 3 things Rio, Rn and Rd. Then I combine them and reintroduce R1 back to get the final result.

Advertisement

14th January 2020, 10:25 #8
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

Advertisement

14th January 2020, 10:42 #9
 Join Date
 Nov 2009
 Location
 Italy
 Posts
 1,146
 Helped
 395 / 395
 Points
 8,537
 Level
 22
Re: Finding the input impedance of CCCS
You can easily find the input impedance using the superposition.
if Vo is the output of the opamp, V+ its noninverting input and V its inverting input and Iin the stimulus:
1) exclude Iin, then (Va) = Vo*RL/(R1+RL)
2) short Vo, then (Vb) = Iin*[R1*RL/(R1+RL)+R2]
Applying superposition (V)=(Va) + (Vb) = Vo*RL/(R1+RL)+Iin*[R1*RL/(R1+RL)+R2]
We know that Vo = A*[(V+)  (V)], but (V+)=0 thus Vo=A*(V)
Substituting Vo:
V = A*(V)*RL/(R1+RL) + Iin*[R1*RL/(R1+RL)+R2]
Zin = (V)/Iin = [R1*RL/(R1+RL) + R2]/[1 + A*RL/(R1+RL)]
If we call, nw, B=RL/(R1+RL) we will have:
Zin = (R1*B+R2)/(1+A*B)
in case R2 >> R1*B then we can approximate Zin = R2/(1+A*B)
Sorry, in my derivation I exchanged the label R1 with RL (R1 is the output series and RL is to ground)
1 members found this post helpful.

14th January 2020, 14:36 #10
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9
Re: Finding the input impedance of CCCS

14th January 2020, 16:18 #11
 Join Date
 Jan 2008
 Location
 Toronto area of Canada
 Posts
 8,817
 Helped
 2068 / 2068
 Points
 54,104
 Level
 56
Re: Finding the input impedance of CCCS
Negative feedback always decreases the output impedance. If something external tries to change the output voltage then the negative feedback sends the change to the inverting input to cancel the change.

14th January 2020, 16:52 #12
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

14th January 2020, 18:51 #13
 Join Date
 Jan 2008
 Location
 Toronto area of Canada
 Posts
 8,817
 Helped
 2068 / 2068
 Points
 54,104
 Level
 56
Re: Finding the input impedance of CCCS
Positive feedback (bootstrapping) increases the output impedance.

14th January 2020, 18:56 #14
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

14th January 2020, 19:10 #15
 Join Date
 Nov 2001
 Location
 US
 Posts
 897
 Helped
 312 / 312
 Points
 10,320
 Level
 24

14th January 2020, 20:13 #16
 Join Date
 Jan 2014
 Posts
 151
 Helped
 1 / 1
 Points
 1,787
 Level
 9

Advertisement

14th January 2020, 21:22 #17
 Join Date
 Nov 2001
 Location
 US
 Posts
 897
 Helped
 312 / 312
 Points
 10,320
 Level
 24
Re: Finding the input impedance of CCCS
Yes, you can choose another element as the extra element, of course. The formulation of the result will be different, because you will have to find Rn and Rd from the point of view of the new extra element. But you can always manipulate algebraically the results for different extra elements to look the same at the end. And of course, when you substitute the numerical values, you must get the same result.

14th January 2020, 22:22 #18
 Join Date
 Nov 2009
 Location
 Italy
 Posts
 1,146
 Helped
 395 / 395
 Points
 8,537
 Level
 22
Re: Finding the input impedance of CCCS
I presume you have to calculate the output impedance seen by the load, that is by RL. To do this you have to substitute the load with a generator and calculate the current flowing through the generator and the voltage across it, then apply Z=V/I.
I used a current generator and I did the following derivation (neglecting input and output impedance of opamp, I considered it as ideal, but the finite OL gain):
In this case we have a current generator so we need a very high impedance, ideally infinite. The feedback regardless to its value (the opamp is ideal here) allows to greatly increase the impedance since the voltage is boosted by the OL gain of the amplifier.Last edited by albbg; 14th January 2020 at 22:31.

14th January 2020, 22:55 #19
 Join Date
 Nov 2001
 Location
 US
 Posts
 897
 Helped
 312 / 312
 Points
 10,320
 Level
 24
Re: Finding the input impedance of CCCS
Applying Blackman's impedance formula gives the output impedance in 1 line. And yes, it is R1*(1+A)
1 members found this post helpful.

14th January 2020, 23:28 #20
 Join Date
 Nov 2009
 Location
 Italy
 Posts
 1,146
 Helped
 395 / 395
 Points
 8,537
 Level
 22
+ Post New Thread
Please login