Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Directivity of Radar Sensor HFS-DC06H

Status
Not open for further replies.

emaq

Member level 4
Joined
Sep 17, 2015
Messages
78
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,288
Activity points
2,001
I have tested the directivity of 5.8GHz HFS-DC06H radar sensor and found it to be 360 degrees, although I was expecting it to be 180 degrees because of the back metal shield on the antenna PCB. See the attached images for the sensor and radiation pattern from some Chinese website.

I want to have the directivity of 180 degrees instead of 360 degrees. Is there is some DIY shielding which I can use to limit the radiation pattern?

hfs-dc06h.jpg

directivity.png
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top