Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] [HFSS] Antenna Measurement and Simulation

Status
Not open for further replies.

elektr0

Full Member level 5
Joined
May 2, 2006
Messages
276
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,371
Hello,
if we measure antennas in the antenna chamber with vector-network-analyzer (VNA).
Let's say two identical antennas:
The measured S21 transmission parameter (divided by 2 and corrected for freespace loss) is available for each angle (azimuth, elevation).
How do I reproduce those results with HFSS.
Farfield result: dB(RealizedGain) is fine, how do I get the phase values?
Thank you.
-e
 

So, for the sake of completeness. I was wondering why there is no phase information for realized gain. Actually we now use realized gain plus Etheta (mag/phase) and Ephi (mag/phase) for further analysis.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top