+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 3
    Points: 146, Level: 1

    Join Date
    Mar 2019
    Posts
    4
    Helped
    0 / 0
    Points
    146
    Level
    1

    neoway n10 gsm module restart problem

    we executing some code in neoway n10 gsm module. module get restarting randomly (example: i kept the module for testing for a 15 hours. in between module get restarted at 5 hours once, 2 hours once, 30 minutes once and 5 minutes once).
    please anybody tell me how to fix this issue?

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 79,246, Level: 68
    Achievements:
    7 years registered
    Awards:
    Most Frequent Poster 3rd Helpful Member

    Join Date
    Apr 2014
    Posts
    16,081
    Helped
    3643 / 3643
    Points
    79,246
    Level
    68

    Re: neoway n10 gsm module restart problem

    Hi,

    Replace R15 with a 10uH inductance.

    No, joke aside.
    It's impossible for us to give help without knowing your circuit and software.

    You need to debug the circuit:
    (Two main reasons for your problem: power supply and software)
    You need to verify that the power supply is stable and within specified values .... all the time.

    Simple method to find out whether there is a software problem:
    Replace your software with one that just toggles an output pin once after RESET. Then connect a scope or pulse counter to this output to detect whether the device unconditionally resets or not.

    Klaus
    Please don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.



    •   AltAdvertisement

        
       

  3. #3
    Newbie level 3
    Points: 146, Level: 1

    Join Date
    Mar 2019
    Posts
    4
    Helped
    0 / 0
    Points
    146
    Level
    1

    Re: neoway n10 gsm module restart problem

    Quote Originally Posted by KlausST View Post
    Hi,

    Replace R15 with a 10uH inductance.

    No, joke aside.
    It's impossible for us to give help without knowing your circuit and software.

    You need to debug the circuit:
    (Two main reasons for your problem: power supply and software)
    You need to verify that the power supply is stable and within specified values .... all the time.

    Simple method to find out whether there is a software problem:
    Replace your software with one that just toggles an output pin once after RESET. Then connect a scope or pulse counter to this output to detect whether the device unconditionally resets or not.

    Klaus




    Hi klaus,

    thank you for your response.

    I replace the code with toggle an output, that time it is not restart at any point.

    While running our application code it restarting at some point. I want to see device boot-up logs while its restarting.
    Please let me can we able to check device boot-up logs or is there any debug UART port in N10?



--[[ ]]--