+ Post New Thread
Results 1 to 10 of 10

9th November 2019, 06:59 #1
 Join Date
 Nov 2019
 Posts
 3
 Helped
 0 / 0
 Points
 30
 Level
 1
How to generate sine wave using Verilog?
I have to generate a two different sine wave(1st sine wave normal sine wave which is generate from 0 degree and 2nd one phase shifted sine wave ) using Verilog, and on google, I found something related to it but somehow I didn't understand. So, could anyone explain to me the logic behind this code?
Code:module sine_cos(clk, reset, en, sine, cos); input clk, reset, en; output [7:0] sine,cos; reg [7:0] sine_r, cos_r; assign sine = sine_r + {cos_r[7], cos_r[7], cos_r[7], cos_r[7:3]}; assign cos = cos_r  {sine[7], sine[7], sine[7], sine[7:3]}; always@(posedge clk or negedge reset) begin if (!reset) begin sine_r <= 0; cos_r <= 120; end else begin if (en) begin sine_r <= sine; cos_r <= cos; end end end endmodule
but here what is the logic for ?
assign sine = sine_r + {cos_r[7], cos_r[7], cos_r[7], cos_r[7:3]};
assign cos = cos_r  {sine[7], sine[7], sine[7], sine[7:3]};

Advertisement

9th November 2019, 08:26 #2
Awards:
 Join Date
 Apr 2014
 Posts
 16,071
 Helped
 3639 / 3639
 Points
 79,154
 Level
 68
Re: How to generate sine wave using Verilog?
Hi,
I expect there is some description where you found the code.
> please post the link to the internet page.
KlausPlease don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.

9th November 2019, 12:25 #3
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 45,795
 Helped
 13920 / 13920
 Points
 262,005
 Level
 100
Re: How to generate sine wave using Verilog?
The oscillator operation has been discussed in previous threads, e.g. https://www.edaboard.com/thread39599.html
The Verilog implementation is somehow clumsy, the function can be made much clearer by using signed data type.
   Updated   
Code Verilog  [expand] 1 2 3 4
output signed [7:0] sine,cos; reg signed [7:0] sine_r, cos_r; assign sine = sine_r + (cos_r >>> 3); assign cos = cos_r  (sine >>> 3);
2 members found this post helpful.

Advertisement

9th November 2019, 15:12 #4
 Join Date
 Feb 2014
 Posts
 903
 Helped
 298 / 298
 Points
 6,274
 Level
 18
Re: How to generate sine wave using Verilog?
Consider that the derivative (slope) of sin is cos and the derivative of cos is sin. Thus you can increment one by a value proportional to the other and you get a selfoscillating output that's a very good (not perfect) sin wave.
The specific code you're questioning is just a power of 2 divide. FvM posted a better way to do this. The more you divide the longer the period is.
The biggest problem is rounding errors. You need to get lucky and find a set of parameters that returns exactly to where it started or you need to reset every cycle introducing a small amount of distortion. If you don't the amplitude will 'walk away' towards zero or infinity.
Bottom line this is a very 'cheap' way to generate a sin wave in an FPGA. For high precision work you're best off using the IP blocks that all FPGA manufacturers provide.Last edited by asdf44; 9th November 2019 at 15:21.
1 members found this post helpful.

Advertisement

10th November 2019, 09:28 #5
 Join Date
 Nov 2019
 Posts
 3
 Helped
 0 / 0
 Points
 30
 Level
 1

10th November 2019, 10:40 #6
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 45,795
 Helped
 13920 / 13920
 Points
 262,005
 Level
 100
Re: How to generate sine wave using Verilog?
>>> is arithmetic shift, >>> 3 means multiply with 0.125.
For a deeper insight how it works please review the linked old thread.
1 members found this post helpful.

15th November 2019, 19:47 #7
 Join Date
 Nov 2019
 Posts
 3
 Helped
 0 / 0
 Points
 30
 Level
 1
How to generate Square wave from Sine wave in verilog ?
Here by using a just normal procedure for generating sine wave , through verilog code. " i have to generate a two different sine wave , 1st normal sine wave (which is start from 0 degree ) and 2nd wave which is start from phase shift(+ 90 degree) sine wave.and that i already done in vivado simulation but Now i want to again generate a square wave from this sine wave, (sine wave > counter ) so please suggest me the logic for verilog !

Advertisement

16th November 2019, 05:46 #8
 Join Date
 Jan 2019
 Posts
 442
 Helped
 111 / 111
 Points
 2,384
 Level
 11
Re: How to generate Square wave from Sine wave in verilog ?
same frequency?
sketch the sin wave, then sketch the square wave on top of it. where along the sin wave if the square wave high? when low?
now write the appropriate logic statements
different frequency?
how do you get from the sinwave frequency to the square wave frequency?

16th November 2019, 11:38 #9
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 45,795
 Helped
 13920 / 13920
 Points
 262,005
 Level
 100
Re: How to generate sine wave using Verilog?
but now i want to again generate a square wave from this sine wave

16th November 2019, 15:03 #10
 Join Date
 Jan 2019
 Posts
 442
 Helped
 111 / 111
 Points
 2,384
 Level
 11
Re: How to generate sine wave using Verilog?
as FvM says, use the sign bit
you specified sine and cos as signed values, so the square waves will be specified by sign + or 
use a statement that checks the sign bit, as FvM suggested
+ Post New Thread
Please login