+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Newbie level 2
    Points: 167, Level: 2

    Join Date
    Jan 2019
    Location
    Ann Arbor
    Posts
    2
    Helped
    0 / 0
    Points
    167
    Level
    2

    Cannot generate calibreview pop-up after PEX

    Hi all,

    I ran into a problem after finishing PEX in calibre. I want to generate a caliberview after PEX in order to run post-layout simulation, however, the "caliberview setting" pop-up does not appear after correctly running PEX. I wonder what`s wrong with the seetings. Here is a picture of the settings.Click image for larger version. 

Name:	Screen.jpg 
Views:	4 
Size:	461.7 KB 
ID:	156415

    Thanks!
    Best,

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 2
    Points: 5,604, Level: 17
    Achievements:
    7 years registered

    Join Date
    Feb 2008
    Posts
    548
    Helped
    181 / 181
    Points
    5,604
    Level
    17

    Re: Cannot generate calibreview pop-up after PEX

    Why do you need a pop up window?
    If you selected Calibre View as output post-layotu netlist format, the extraction tool should just generate it. Check your directory, for the presence of this file.



    •   AltAdvertisement

        
       

  3. #3
    Newbie level 2
    Points: 167, Level: 2

    Join Date
    Jan 2019
    Location
    Ann Arbor
    Posts
    2
    Helped
    0 / 0
    Points
    167
    Level
    2

    Re: Cannot generate calibreview pop-up after PEX

    Hi timof,
    I mean, if I select Calibre View as output netlist format, some setup options the should appear. I attached a picture to show the pop-up.Click image for larger version. 

Name:	shot.jpg 
Views:	3 
Size:	63.3 KB 
ID:	156434But nevermind, the problem is solved by restart Virtuoso:) Thanks!



    •   AltAdvertisement

        
       

  4. #4
    Advanced Member level 2
    Points: 5,604, Level: 17
    Achievements:
    7 years registered

    Join Date
    Feb 2008
    Posts
    548
    Helped
    181 / 181
    Points
    5,604
    Level
    17

    Re: Cannot generate calibreview pop-up after PEX

    OK, thanks.
    Indeed, some problems go away after you restart Virtuoso.
    It's probably the first thing to try, when debugging such problems.



--[[ ]]--