T
treez
Guest
To test this GDT (2051-47-SM-RPLF) is OK, can we simply place it in series with 3k and put this across 100V?.......Assumedly, from the datasheet, this makes it glow, as the datasheet says glow current is 10mA at 70V?
If it glows then its OK, we are thinking.
Otherwise we will have to put 470V across it in series with a resistor
2051-47-SM-RPLF datasheet
https://www.bourns.com/docs/Product-Datasheets/2051.pdf
If it glows then its OK, we are thinking.
Otherwise we will have to put 470V across it in series with a resistor
2051-47-SM-RPLF datasheet
https://www.bourns.com/docs/Product-Datasheets/2051.pdf