Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reflective LCD driver design

Status
Not open for further replies.

Rikr09

Member level 3
Joined
Feb 14, 2013
Messages
59
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,745
Hello, i need to design a driver to the LCD described on the following image.

Capture 1.PNG


I'm using a frequency generator with a 5Vpp TTL signal to activate one segment or word of the LCD and commuting the corresponding COMM's but i have many interference, so...

- I don't know if i'm using this correctly.
- How i can controll all the LCD with uC.


So i would like you to help me with this.

Thanks a lot,

Ricardo
 

This is a multiplexed LCD which needs special multiplex driver generating multilevel waveforms for all LCD pins, review e.g. PIC16F19185 datasheet to see how it works.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top