Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to simulate finite charge applied to the gate of a FET in Synopsys TCAD

Status
Not open for further replies.

sahal149

Newbie level 4
Joined
Mar 21, 2018
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
39
Hello, I am trying to simulate a small charged particle attached to the gate surface of a FET and see the effect of the charge. I want to define how much charge (i.e: 1.6e-19 C) I will give to that small region attached to the gate. I have tried using the fixed charge mentioned in the manual, but I get the same results for various amount of charge. I need help with the code.
 

I don't know anything about that simulation environment but why not a current source supplying a pulse. Charge = current*time. Though simulating one electron and expecting results is bold....
 

If you place a charge at the "gate surface" - i.e. at the gate and the gate dielectric interface (or inside the gate or at any other surface of the gate electrode), it will be screened by free carriers in the gate material.
You won't see any effect on any electrical characteristics.

But if you place it at the gate dielectric - semiconductor interface - you will see an effects (such as Vt shift), proportional to charge value.

Check with your TCAD tool manual, where you place the charge.
 
Thank you for your answer. In that case, if I apply the charge at the oxide/silicon interface in the simulation environment, will it be the same as attaching the charge at the gate surface in real-time?
 

Basically I am trying to find what is the smallest amount of charge that MOSFET can detect. One electron charge was just for an example.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top