+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Member level 3
    Points: 1,143, Level: 7

    Join Date
    Apr 2015
    Posts
    56
    Helped
    0 / 0
    Points
    1,143
    Level
    7

    Network analyzer calibration for RF test points

    Hello everyone,

    I have used some RF test points to characterize the RF components of a S-band receiver prototype. The part numbers are: MS-156C3 for the RF test points; MS-156-HRMJ-H1 for the plug (the mate-connector).

    Since I would like to measure the S-parameters, I need to use a calibration kit for the network analyzer.
    My question is:

    Is avaliable on the market a calibration kit for the MS-156-HRMJ-H1 connector?

    Many thanks.
    Yours sincerely,
    Antonio

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 261,421, Level: 100
    Awards:
    1st Helpful Member

    Join Date
    Jan 2008
    Location
    Bochum, Germany
    Posts
    45,680
    Helped
    13885 / 13885
    Points
    261,421
    Level
    100

    Re: Network analyzer calibration for RF test points

    What the intended accuracy (delay, Z0)? MS-156C itself has limited precision, see e.g. VSWR spec.

    Did you consider to make your own calibration kit?



--[[ ]]--