Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[ARM] Board bring up with ATSAMD20E15

Status
Not open for further replies.
T

TonySterrett

Newbie level 1
Joined
Oct 18, 2019
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
Hi,
I am trying to bring up a Board using the ATSAMD20E15 But, I am getting an error from the programmer:

Error could not activate interface. But found a DAP with ID 0xbc11411

This just in, when using the "Device Programming" tab/window I can uncheck the erase flash before programming and verify after programming, then I am able to program successfully and verify. It still won't program from the "Debug" button.
Thanks in Advance. This maybe a dup, I tried posting before.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top