Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

At45db041b vs at45d041

Status
Not open for further replies.

neazoi

Advanced Member level 6
Joined
Jan 5, 2008
Messages
4,118
Helped
13
Reputation
26
Reaction score
15
Trophy points
1,318
Location
Greece
Activity points
36,907
Hi I have a AT45DB041B connected to the ICSP of the atmega644 and stores data ok.
I am trying to replace it with the through hole AT45D041 which seems identical to me apart from the 5v requirement, but this one does not work.

Aren't these identical memories, maybe there is something I am missing?
 

Hi,

If I need to know that, I'd compare the datasheets.

I'd focus on voltage levels, timing...

Klaus
 

I have a AT45DB041B connected to the ICSP of the atmega644 and stores data ok.
I am trying to replace it with the through hole AT45D041

Many programmer's tools check the chip device ID and refuse to download the code if the target differs from the part selected, unless you uncheck this option - when available. Even a bare suffix added on the part number very often is enought to make a change in their ID's. Are you aware of that?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top