+ Post New Thread
Results 1 to 8 of 8

14th October 2019, 12:13 #1
 Join Date
 Mar 2018
 Posts
 18
 Helped
 0 / 0
 Points
 395
 Level
 4
How to calculate transformer winding losses
Hi,
We used a transformer from payton for +330V to 50V Half bridge LLC converter.Refer the datasheet attached,
In that transformer losses is given as 26W.
Also practically we observed the same losses in transformer.
Payton provide the loss details as below based on our request.
Core loss=5W.Copper losses=6W,Additional losses=15W
They told that additional loss is due to parasitic leakage inductanceAttachment 156028.
How to calculate these additional losses?

Advertisement

14th October 2019, 17:20 #2
Re: How to calculate transformer winding losses
You attachment 156028 returns an "invalid attachment" error.
I am also curious what they mean parasitic leakage inductance losses.
What I can recall from leakage inductance; that it is uncoupled inductance that will ring with parasitic capacitances which will produce severe ringing. That ringing can generate a voltage breakdown in switching semiconductors, and must be snubbed. The snubbers, at least the simple ones, will dissipate that energy as heat in a resistor. Which of course is a power loss which reduces the efficiency.
But those are snubber losses. Transformers and inductor losses consist only of core or copper losses. And each has its own sublosses: i.e. copper may divided into RDC, skin effect, fringing, etc.My batteries are recharged by "Helpful Post" ratings.
If you feel that I've helped you, please indicate it as a Helpful Post

14th October 2019, 17:28 #3
Awards:
 Join Date
 Apr 2014
 Posts
 15,906
 Helped
 3609 / 3609
 Points
 78,412
 Level
 68
Re: How to calculate transformer winding losses
Hi,
To be honest: I don´t know the answer.
* maybe the copper loss is tested with DC. Then there are additional losses caused by AC: Proximity effect and skin effect.
***
About leakage inductance:
It causes the output voltage to be less than ideal... but the current is almost ideal: U_in x I_in is higher than U_out x I_out ... but I expect it to cause phase shift rather than heat.
KlausPlease don´t contact me via PM, because there is no time to respond to them. No friend requests. Thank you.

Advertisement

14th October 2019, 22:21 #4
 Join Date
 Jan 2008
 Location
 Bochum, Germany
 Posts
 45,616
 Helped
 13876 / 13876
 Points
 261,156
 Level
 100
Re: How to calculate transformer winding losses
Did you try to detetmine the loss components yourself? The quoted statement can't be found in the datasheet. "Loss due to parasitic leakage inductance" doesn't sound like a serious substantiation. A possible explanation might be the difference between theoretical core losses of the basic transformer and real core losses according to fringing fields, flux perpendicular to main magnetic path etc.

15th October 2019, 00:13 #5
 Join Date
 Aug 2015
 Location
 Melbourne
 Posts
 1,877
 Helped
 693 / 693
 Points
 11,532
 Level
 25
Re: How to calculate transformer winding losses
Additional losses=15W
They told that additional loss is due to parasitic leakage inductance
and are proportional to load current  so 15W of extra Cu heating and full power, 7.5W at half power etc ...
1 members found this post helpful.

17th October 2019, 18:04 #6
 Join Date
 Mar 2018
 Posts
 18
 Helped
 0 / 0
 Points
 395
 Level
 4
Re: How to calculate transformer winding losses
From the measured leakage inductance in the realized transformer,Is it possible to calculate the losses due to leakage inductance?
So that we can plan thermal constraints of transformer.

Advertisement

17th October 2019, 20:15 #7
 Join Date
 Aug 2015
 Location
 Melbourne
 Posts
 1,877
 Helped
 693 / 693
 Points
 11,532
 Level
 25
Re: How to calculate transformer winding losses
it is part of the overall losses and does not lend itself to exact calculation  frequency makes a difference as does the shape of the currents flowing  no doubt the data sheet figures are derived from sine wave currents which give the lowest loss figures  heatsinking and max hot spot temp also affect losses ...

20th October 2019, 12:04 #8
 Join Date
 Sep 2008
 Location
 cambridge
 Posts
 6,905
 Helped
 504 / 504
 Points
 33,225
 Level
 44
Re: How to calculate transformer winding losses
Yes, your transformer appears to be an planar transformer, and appears to have leakage inductance designed into it deliberately so its an “Integrated transformer” .
Deliberate designin of leakage inductance is common in LLC transformers, so there are not really losses associated with it (at least not directly). But I think you probably know this.
Though of course, if there is increased circulating current due to resonant component choices, than that will be like a conduction lossLast edited by treez; 20th October 2019 at 12:20.
+ Post New Thread
Please login