+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Full Member level 5
    Points: 2,653, Level: 12
    Achievements:
    7 years registered

    Join Date
    Jan 2012
    Posts
    304
    Helped
    1 / 1
    Points
    2,653
    Level
    12

    Using a 1.8V MCU with a micro-SD card

    I'm having a hard time figuring out how this is done. I'm reading that some memory cards do support 1.8V signalling, but I don't know which type of cards these are. I'm also not sure if these cards have to be initialized with 3.3V logic level and then switch to 1.8V. This article (https://www.sdcard.org/developers/ov...ing/index.html) states that 1.8V logic level memory cards are marked with 'LV', but googling 'LV memory card' gives no usable results. Can someone help me out?

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 2
    Points: 1,892, Level: 10
    Achievements:
    7 years registered
    dhakeparag81's Avatar
    Join Date
    Jun 2012
    Location
    INDIA
    Posts
    123
    Helped
    1 / 1
    Points
    1,892
    Level
    10

    Re: Using a 1.8V MCU with a micro-SD card

    Try the bellow link
    https://www.sdcard.org/developers/ov...ing/index.html

    Low voltage signaling card (LVS) that can operate on voltage range of 2.7-3.6v but signaling voltage range is 1.70-1.95v, this is specified in the specification document of SD Association, so the SD card which supports the specification 6.0 it also support the lvs signaling but the supply voltage specified above.

    https://www.sdcard.org/downloads/pls/

    download the Physical Layer Simplified Specification.
    Last edited by dhakeparag81; 18th October 2019 at 07:01.



--[[ ]]--