Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to get two Sweep and Repeat Generators in sync.

Status
Not open for further replies.

Tractor Beam

Newbie level 4
Joined
Dec 8, 2011
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,368
What is the best way to make a sign wave shift frequency downward only about 10 Hertz, then repeat every .2 seconds.
The initial frequency 3000 Hz.
There will be 2 generators sweeping, both will be in sync (repeat at the same time).

See attachment for drawing.
 

Attachments

  • Wave Expand0001.pdf
    388 KB · Views: 171

Depends on the generator. Popular arbitrary function generators can sync their sweeps through trigger out and sync in jacks, e.g. Agilent 33220A.
 

Many types of oscillators change frequency if you change supply voltage. Or you can 'bend' an RC time constant by changing a resistance somewhere in the circuit, or by applying a voltage at a strategic node. Many oscillators have their frequency determined from an RC time constant.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top