+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Member level 1
    Points: 312, Level: 3

    Join Date
    Feb 2019
    Posts
    36
    Helped
    0 / 0
    Points
    312
    Level
    3

    CRO measurements whether to ground or not and when to ground

    I want to measure input voltage with oscilloscope for my DUT which runs with 20v. Do i need to ground the oscilloscope? Wheb do i need to ground the instrument with ground mat and do i need to be also grounded? When is it necessary to geound the instrument??

    Thanks

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 53,066, Level: 56

    Join Date
    Apr 2011
    Location
    Minneapolis, Minnesota, USA
    Posts
    12,978
    Helped
    2583 / 2583
    Points
    53,066
    Level
    56

    Re: CRO measurements whether to ground or not and when to ground

    The scope doesn't absolutely need a soil connection. Nor your DUT. In fact a good thing to install is an isolation transformer. It insulates the scope from soil.

    There are situations where mains AC can find a short circuit through your setup, if you're not careful. More than once I have zapped my projects because I forgot to pay attention to hot and neutral mains wires.



--[[ ]]--