+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Newbie level 3
    Points: 61, Level: 1

    Join Date
    Jul 2019
    Posts
    5
    Helped
    0 / 0
    Points
    61
    Level
    1

    Need help on ADS inductor simulation

    Hi all

    I have a problem with balun simulation which is made by coilsys.

    as you can see bellow, 4 layout pins are connected to same net ( P_minus ) and I wanna force these pins to adequate nets respectively.

    How can I force them ..?

    Click image for larger version. 

Name:	qqqqq.PNG 
Views:	12 
Size:	272.2 KB 
ID:	155533

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 30,418, Level: 42
    BigBoss's Avatar
    Join Date
    Nov 2001
    Location
    Turkey
    Posts
    4,458
    Helped
    1340 / 1340
    Points
    30,418
    Level
    42

    Re: Need help on ADS inductor simulation

    But they are physically connected, you wanna separate the nets ?? I don't think so that is possible..



    •   AltAdvertisement

        
       

  3. #3
    Advanced Member level 5
    Points: 14,152, Level: 28

    Join Date
    Apr 2014
    Posts
    2,216
    Helped
    883 / 883
    Points
    14,152
    Level
    28

    Re: Need help on ADS inductor simulation

    Is the layout correct? Is there a connection between primary and secondary, possibly because of wrong layer assigments?



    •   AltAdvertisement

        
       

  4. #4
    Advanced Member level 5
    Points: 30,418, Level: 42
    BigBoss's Avatar
    Join Date
    Nov 2001
    Location
    Turkey
    Posts
    4,458
    Helped
    1340 / 1340
    Points
    30,418
    Level
    42

    Re: Need help on ADS inductor simulation

    This is not a Balun, it's a transformer with tapped pins.It can be used as a Balun of course but tapped pins are not necessary if you don't drive an active circuit through them..



--[[ ]]--