Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Diode performance specification

Status
Not open for further replies.

Zak28

Advanced Member level 2
Joined
Aug 19, 2016
Messages
579
Helped
6
Reputation
12
Reaction score
6
Trophy points
18
Activity points
4,681
Is a fast recovery diodes maximum reverse recovery time the same speed during its max forward current & Repetitive peak reverse voltage or is it much longer than what was specified?
 
Last edited:

usually specified on the data sheet, e.g. 125 degC and If = 30A, and dIf/dt = 100A/us ( quite slow ) etc

you have to read all the fine print carefully...
 
  • Like
Reactions: Zak28

    Zak28

    Points: 2
    Helpful Answer Positive Rating
usually specified on the data sheet, e.g. 125 degC and If = 30A, and dIf/dt = 100A/us ( quite slow ) etc

you have to read all the fine print carefully...

Most small SMT diodes dont have any charts for recovery time or di/dt.
 

Most small SMT diodes dont have any charts for recovery time or di/dt.
Which is telling you that if those are critical parameters for you, you shouldn’t be using that particular device. It’s like asking what the 0 to 60 acceleration for a Smart Car is. If you’re asking that question, it’s the wrong car. (FYI, it’s double digits).
 
  • Like
Reactions: Zak28

    Zak28

    Points: 2
    Helpful Answer Positive Rating
if you are using a small diode in a switching ckt and the data sheet does not give switching information, then you use it at your own risk, other batches may differ significantly from the unique one you try in a single prototype.

For a more guaranteed outcome you have to buy from a manufacturer who does list these parameters, e.g. ST.com
 
  • Like
Reactions: Zak28

    Zak28

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top