Adithya_Pai
Newbie level 6
I am curious to understand Analog-Digital Interface Bridge in SiMetrix which has model card with these parameters as mentioned in image
I am simulating this component with this test setup
Simulation waveform
in_low=2.1
in_high=2.2
which can be understood as thresholds but looks like out_low, out_high, clamp_low, clamp_high needs some other test cases can anyone elaborate in these parameters in the model card of adc interface?
I will be sharing a link from SiMetrix of website which i had refered
https://help.simetrix.co.uk/8.0/simetrix/mergedProjects/simulator_reference/topics/simref_digitalmixedsignaldevicereference_analog_digitalinterfacebridge.htm#MiniTOCBookMark9
I am simulating this component with this test setup
Simulation waveform
in_low=2.1
in_high=2.2
which can be understood as thresholds but looks like out_low, out_high, clamp_low, clamp_high needs some other test cases can anyone elaborate in these parameters in the model card of adc interface?
I will be sharing a link from SiMetrix of website which i had refered
https://help.simetrix.co.uk/8.0/simetrix/mergedProjects/simulator_reference/topics/simref_digitalmixedsignaldevicereference_analog_digitalinterfacebridge.htm#MiniTOCBookMark9