I am curious to understand Analog-Digital Interface Bridge in SiMetrix which has model card with these parameters as mentioned in image

Click image for larger version. 

Name:	model.JPG 
Views:	1 
Size:	50.4 KB 
ID:	155471

I am simulating this component with this test setup

Click image for larger version. 

Name:	Bridge-Interface.JPG 
Views:	1 
Size:	31.8 KB 
ID:	155472

Simulation waveform

Click image for larger version. 

Name:	Bridge Interface plot.png 
Views:	3 
Size:	33.9 KB 
ID:	155473

in_low=2.1
in_high=2.2

which can be understood as thresholds but looks like out_low, out_high, clamp_low, clamp_high needs some other test cases can anyone elaborate in these parameters in the model card of adc interface?

I will be sharing a link from SiMetrix of website which i had refered

https://help.simetrix.co.uk/8.0/sime...niTOCBookMark9