Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
1) buy a signal generator with burst function.
2) use a dds chip
3) use an fpga with a DAC and create your own dds.
4) use a 3KHz oscillator and a fet switch to gate a 27MHz oscillator.
5) etc., etc.
Use the FY6600 generator and connect the first source to the second generator, first square wave with 2 Hz period, 50 % duty cycle, and the second on/off modulated and carrierfrequency of 27 MHz
1) buy a signal generator with burst function.
2) use a dds chip
3) use an fpga with a DAC and create your own dds.
4) use a 3KHz oscillator and a fet switch to gate a 27MHz oscillator.
5) etc., etc.
Yes bro i am trying the third option i am using 27MHZ crystal oscillator which is giving a sine wave having a frequency of 27 MHZ but dont know how to switch the signal on and offf??
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
