Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Deriving admittance matrix for shortened quarter-wavelength transmission line

Status
Not open for further replies.

promach

Advanced Member level 4
Joined
Feb 22, 2016
Messages
1,199
Helped
2
Reputation
4
Reaction score
5
Trophy points
1,318
Activity points
11,636
For Reduced-size branch-line and rat-race hybrids for uniplanar MMIC's , how to derive equation (2) ?

and is the imaginary constant j needed in equation (1) ?

Y32GkzC.png


ywzcdJw.png
 

For equation (1) , I am trying to use MATLAB y2abcd() function to convert admittance matrix to ABCD matrix.

However, I am getting mismatch between MATLAB answer and actual theoretical result.

tpXeKWN.png


6FXNyjF.png
 

how to derive equation (2) ?
and is the imaginary constant j needed in equation (1) ?
There is no help, since your questions are too easy.
This is very true for your all posts.
Always your questions are too elementary and easy to answer.

For equation (1) ,
.........................................................................
However, I am getting mismatch between MATLAB answer and actual theoretical result.
Current direction of I2 is defined like attached figure in Y-parameter.
 

Attachments

  • 190901-214451.png
    190901-214451.png
    3.8 KB · Views: 118
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top