Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

I don’t hear a dial tone in the Plantronics CS540 Wireless Headset What should I do?

Status
Not open for further replies.

victorjohn9211

Newbie level 4
Joined
Jun 24, 2019
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Erina NSW
Activity points
79
Press the call control button to see if you hear a beep in the headset. If you do not hear a beep, try charging your headset. If you do hear a beep, the headset may no longer be linked to the base. Try re-subscribing the headset to the base.

If the problem persists, ensure the phone is off the hook. If using a handset lifter, make sure the lifter is lifting the handset completely off the hook.

If the problem still not fixed, pick up your handset and verify that you can hear a dial tone. If you do hear a dial tone on your handset, adjust the configuration switch on the base. If you do not hear a dial tone on your handset, then contact your company’s telecommunications department.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top