Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Trouble with my analyzer ?

Status
Not open for further replies.

Externet

Advanced Member level 2
Joined
Jan 29, 2004
Messages
570
Helped
28
Reputation
58
Reaction score
29
Trophy points
1,308
Location
Mideast US
Activity points
5,563
Hello. My Motorola R2600B communications analyzer is showing KHz at modulation levels (right lower)
for Mod sum;
for Fixed 1KHz,
and for Synth.
and at the modulation display vertical scale (centre, left)

Do I have a wrong setting somewhere ?
Manual shows V for Volts at those unit locations.

Do you have one of these instruments ?
 

Attachments

  • P1010828.jpg
    P1010828.jpg
    278.1 KB · Views: 49

Thank you, vfone.
Yes, in monitoring mode the audio units go to V; but in the 'modulation mode' at left still show KHz for vertical scale. The picture linked shows dBm units but in 'spectrum analyzer' mode.

Hope someone with one of these gets me light.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top