+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 6
    Points: 133, Level: 1

    Join Date
    Apr 2019
    Posts
    13
    Helped
    0 / 0
    Points
    133
    Level
    1

    Drive motor through IRF520 MOSFET module and Arduino

    I am trying to run the motor through Arduino and IRF520 Mosfet Driver Module but the motor does not come to their its own Home location through microlimit switch.
    But If I drive through relay it comes at its own home location. Relay connection was
    Relay
    Common shorted with NC connected with NO of Motor
    NO of relay is connected to Ground
    Gnd and 12V of Motor is connected to 12V Power supply
    I have attached an image of the motor module that I am using.

    There are six pins in this motor Motor Connections with Relay

    I do not know about the connections of the motors with the IRF520 driver module which works exactly same as it is working with the relay module. Please If anyone knows about the connections with MOSFET DRIVER Module please let me know and how to rotate motor 360 degree (On home position) and stop.
    Click image for larger version. 

Name:	IMG_20190804_202001.jpg 
Views:	4 
Size:	498.4 KB 
ID:	154867Click image for larger version. 

Name:	IMG_20190804_202001.jpg 
Views:	4 
Size:	498.4 KB 
ID:	154867Click image for larger version. 

Name:	hKIsc.jpg 
Views:	4 
Size:	18.2 KB 
ID:	154868

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 6
    Points: 1,911, Level: 10

    Join Date
    Jan 2019
    Posts
    358
    Helped
    88 / 88
    Points
    1,911
    Level
    10

    Re: Drive motor through IRF520 MOSFET module and Arduino

    please draw the circuit for the arduino, the MOSFET Drive Module and the motor
    show the connections between the arduino the mosfet driver and from the mosfet driver to the motor
    show all voltage sources and all ground connections
    show all wires between the three pieces

    please draw the circuit for the arduino, the relay and the motor
    show the connections between the arduino therelay and from the relay to the motor
    show all voltage sources and all ground connections
    show all wires between the three pieces

    clearly label both circuits
    the more clear and complete the information, the more clear and complete a response will be

    this may help:
    https://robu.in/product/irf520-mosfe...-raspberry-pi/



--[[ ]]--