Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ir pair not wark behind black acralic

Status
Not open for further replies.

dhiraj.mahajan

Member level 1
Joined
May 29, 2017
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
265
hello;

i have used ir pair to we-cup controller in infant obstacle is detect but enclosure has black acrylic the IR is not wark what is problem

Untitled.png
 

Black isn't black. It can be IR transparent dye (as in IR sensor package) or some IR absorbing material. Another possible problem is crosstalk due to surface reflection. Did you try with increased TX to RX separation?
 

the IR is not wark what is problem

By the succinct description "the IR doesn't work", do you mean that it detects when it should not, or simply does not detect at all? As a rule, since you are using the same optical barrier for both, it would be ideal to put them as close as possible to the surface and add a housing around both emitters and receivers in order to avoid the return of light, as FvM mentioned by internal instead of by external reflection.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top