+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 1
    Points: 16, Level: 1

    Join Date
    Aug 2019
    Posts
    1
    Helped
    0 / 0
    Points
    16
    Level
    1

    How to Solve the “Naming Error” in the LVS

    Dear All

    Click image for larger version. 

Name:	捕1.PNG 
Views:	7 
Size:	73.8 KB 
ID:	154744
    I check the net9 in the layout --------------------(1)
    I check the PWM_B,X123/PWM_B in the source--------(2)

    (1)(2)is same.
    Q:where is the error? Thanks!

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 3
    Points: 1,386, Level: 8

    Join Date
    Sep 2015
    Posts
    150
    Helped
    27 / 27
    Points
    1,386
    Level
    8

    Re: How to Solve the “Naming Error” in the LVS

    You have a number of discrepancies. Start with fixing your port error.


    1 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Newbie level 1
    Points: 19, Level: 1

    Join Date
    Aug 2019
    Posts
    1
    Helped
    0 / 0
    Points
    19
    Level
    1

    Re: How to Solve the “Naming Error” in the LVS

    Hello! Usually if in layout name 1 net and in source name - 2 nets , it means that you shorted PWM_B,X123/PWM_B. Have a look carefully, may be you put extra some vias.
    As life huck you mean put some pin (for exapmle "name1") on net PWM_B and pin "name2" on net X123/PWM_B and then LVS will see shorts and it will be easier to find short.



--[[ ]]--