Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ADS parameter sweep trace color

Status
Not open for further replies.

Nhera

Member level 1
Joined
Oct 12, 2015
Messages
36
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
293
When I perform a parameter sweep in ADS, the traces are always the same color. I cant even lick on an individual trace. Is there a way to make the traces resulting from different parameters easier to distinguish?

0730175213.PNG
 

Double Click the curve, "Trace Options"->>Linear->>Line Color ( tick the box)
 
  • Like
Reactions: Nhera

    Nhera

    Points: 2
    Helpful Answer Positive Rating
Thank you, it works.
 

Double Click the curve, "Trace Options"->>Linear->>Line Color ( tick the box)

Another question, if I manually change a parameter and simulate again, is it possible to have the previous traces to be overlaid with the newly simulated trace?
 

Another question, if I manually change a parameter and simulate again, is it possible to have the previous traces to be overlaid with the newly simulated trace?

Have a look at the "History" menu in the ADS data display.
 

Have a look at the "History" menu in the ADS data display.

It works, but the history trace is a very thick blue line. I could not find where to edit the trace color+thickness
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top