Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Simulation problem with MMSIM using smic 65nm technology

Status
Not open for further replies.

abdoboua

Junior Member level 1
Joined
Mar 15, 2019
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
138
Hello, I have a problem when simulating an inverter created with smic 65nm technology library.
Here is a screenshot for the error messages

pb_spectre.png

Also I don't know what model files to choose, Is it .ckt files or .mdl files

model_files.png

and in the simulator_version.txt file it mentions that it should be Cadence spectre version -------- V6.2.1 or newer. and I am working with MMSIM15.10.257

Your help appreciated
 

Simply the simulator does not know which model you have used.
Model files must be defined in "Setup" tab in ADE.
 

I don't know which files to choose ,either .mdl or .ckt
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top